Molds Diagnosis and treatment of mold 1. Mold Damage is observed in buildings due to the development of mold. They form at the corners of premises, behind furniture. Bedrooms, bathrooms, kitchens, laundry rooms, cellars or storage rooms seem to be the most vulnerable premises. Mold formation should be avoided because : • they alter the appearance of the premises • they degrade the interior finishes • they give off unpleasant odors • they can have harmful consequences on the health of the occupants. 2. Mold allergies and intolerances A mold allergy is manifested by allergic rhinitis, eye irritation, cough and dyspnea; allergic bronchial asthma. Molds also irritate the respiratory tract, the mucous membranes of the eye and the skin. In conclusion, you are bad at home because of mold. 3. Diagnosis of humidity Measurement of the humidity of the walls and research of the sources of humidity. The causes are various such as surface condensation, internal condensation, hygroscopicity, soil humidity, construction humidity, rain falls, cracks in the walls, damaged wall, poor drainage, capillarity, etc. 4. Thermographic analysis Analysis of thermal bridges that cause surface condensation. Thermal bridges are near the insulation of the house. A house insulated from the inside, the junction between the floors and the walls is a frequent thermal bridge. For a house insulated from the outside, the balconies are a frequent place of thermal bridges. If the house is not insulated at all, there can also be thermal bridges; At this time these are the places where the outer wall is thinner. Defects in the insulation of the house, hidden defects, etc. 5. Mold remediation Careful application of anti-humidity treatment to solve your mold problem.